Sony VPL-CX70 User Manual

49
GB
Troubleshooting
Others
Caution Messages
Use the list below to check the meaning of the messages displayed on the screen.
Frequency is out of range! • This input signal cannot be projected as the frequency is out of the
acceptable range of the projector.
c Input a signal that is within the range of the frequency.
• The resolution setting of the output signal of a computer is too
high.
c Set the setting of output to XGA (see page 20).
Please check Input-A
Signal Sel.
• You have input RGB signal from the computer when “Input-A
Signal Sel.” in the SET SETTING menu is set to “Component.”
c Set “Input-A Signal Sel.” correctly (see page 35).
Please replace the LAMP. • It is time to replace the lamp.
c Replace the lamp.
Message Meaning and Remedy
Not applicable! • You have pressed the wrong key.
c Press the appropriate key.
The panel keys are locked ! • “Panel Key Lock” in the INSTALL SETTING menu is set to “On.”
c All the keys on the control panel of the projector are locked.
Operate the projector with the keys on the Remote Commander
(see page 36).
Message Meaning and Remedy

Sony VPL-CX70 Specifications