179
Importing/exporting
Frame memory content can be imported from a computer
using the Home > Content > Import/Export menu. You
can also export multiple content together as an archive
file and import an exported archive file into content
storage.
For details, see “Importing/Exporting Content”
(page 355).
Frame Memory
Operations
Assigning a Frame Memory Output
To output frame memory images to a monitor, for
example, the output signals from frame memory (FM1 to
FM16) must be assigned to cross-point buttons
beforehand.
For details about assignment, see “Creating a Cross-
Point Assign Table” (page 379).
Selecting an Input Signal
You can use the frame memory source 1 bus or 2 bus
signal for the input to frame memory.
Select a signal in a cross-poi
nt button row assigned with
the frame memory source 1 bus or 2 bus.
For details about selecting a signal, see “Chapter 4
Selecting Signals” (page 80).
Selecting a Frame Memory Output
Channel
Displaying the frame memory output
channel status
Open the Home > Frame Memory > FM Common >
Channel > Status menu (13109.31).
The status of the frame memory output channels is shown
on t
he left, and the properties of the content recalled on
the selected frame memory output channel are shown on
the right.
The following information is displayed in the frame
memory out
put channel status.
• Frame memory output channel
For combined channels, this is displayed in odd-
numbered channel
/even-numbered channel format.
• Recalled content thumbnail
“No Thumbnail” is displayed if there is no thumbnail
for the
content.
• Name of recalled content
To Next Page
Loading...
Need help?
General
