Star Micronics NX-1500 User Manual

– 59 –
TROUBLESHOOTING
DC Power abnormal.
Check RESET circuit;
replace parts.
Check crystal circuit;
replace parts.
1) Replace CPU or ROM.
2) Check relevant circuit.
NO
NO
NO
NO
See 4-2. Power Supply
Circuit Abnormal.
START
VH, VL, +5V
are
supplied? *4
YES
RESET
signal becomes
HIGH? *6
YES
Crystal
waveform is
normal? *7
YES
ROM OE
signals become
LOW?
YES
Carriage motor abnormal.
Check operation.
END
4. Repair by Replacement of Parts
4-1. Does not Operate at All with Power on

Star Micronics NX-1500 Specifications

General

Brand	Star Micronics
Model	NX-1500
Category	Printer
Language	English