Star Micronics TUP500 series User Manual

Contents
1. GENERAL DESCRIPTION 1-1
2. CONFIGURATION 2-1
2.1. Basic Configuration and Descriptions of Modules 2-1
2.1.1. Basic Configuration 2-1
2.1.2. Thermal Mechanism Module 2-1
2.1.3. Presenter Module 2-1
2.1.4. Control PCB Module 2-1
2.1.5. Power Connector Cable Module 2-1
2.1.6. Roll Paper Supply Module 2-1
2.2. Optional Parts Selectable for the Modules 2-2
3. BASIC SPECIFICATIONS 3-1
3.1. Print Specifications 3-1
3.2. Character Specifications and Bar Code Specifications 3-4
3.2.1. STAR Line Mode 3-4
3.2.2. STAR Page Mode 3-5
3.2.3. ESC/POS Mode 3-6
3.3. Paper Specifications 3-7
3.3.1. Thermal Roll Paper 3-7
3.3.2. Black Mark Specifications 3-13
3.4. Thermal Mechanism Module 3-16
3.4.1. Thermal Head 3-16
3.4.2. • Auto-cutter 3-16
3.4.3. Paper Feed Motor 3-16
3.4.4. Sensors 3-16
3.5. Presenter Module 3-17
3.5.1. Conveyance Roller 3-17
3.5.2. Paper Feed Motor 3-17
3.5.3. Sensors 3-17
3.6. Roll Paper Supply Module 3-18
3.6.1. Roll Paper Holder Unit Specifications 3-18
3.6.2. Roll Paper Holder Unit Adjustment Method 3-18
3.6.3. Near-end Detector 3-21
3.7. Reliability Specifications 3-22
3.7.1. Thermal Mechanism Module 3-22
4. EXTERNAL SPECIFICATIONS 4-1
4.1. External Specifications 4-1
4.1.1. External Dimensions 4-1
4.1.2. External Drawing 4-1
4.1.3. Mass 4-1
4.2. Operating Unit Specifications 4-4
4.2.1. Switch 4-4
4.2.2. LED 4-4
4.3. Interfaces 4-4
4.4. DIP Switches 4-4
5. AMBIENT SPECIFICATIONS 5-1
5.1. Temperature and Humidity 5-1
5.1.1. When Operating 5-1
5.2. EMC (Electromagnet Compatibility) 5-2
5.2.1. Emission 5-2
5.2.2. Immunity 5-2
5.3. Vibration/Falling Shocks 5-4
5.3.1. Vibration Tests (When Packing) 5-4
5.3.2. Drop Tests (When Packing) 5-4
5.3.3. Impact Tests (When Not Packing) 5-4

Star Micronics TUP500 series Specifications

General

Brand	Star Micronics
Model	TUP500 series
Category	Printer
Language	English