Housing and Bracket: 2A-1
Mid Unit
Housing and Bracket
Precautions
Precaution for Housing and Bracket
Z9J0112100001
CAUTION
Do not break or cut bonding wires, as they perform an important function in the prevention of galvanic
corrosion or build up of static charges.
Replace any damaged wire.
NOTE
• When dismantling housing and bracket, inspect mountings and bolts for damage and wear. Replace
if necessary.
• Check the condition of the zinc anodes on lower section of mid unit. Replace if necessary.
To Next Page
Loading...
Need help?
General
