6-44 CHASSIS
• Remove the brake pads. (c::7' 6-42)
• Remove the brake caliper holder.
• Remove the spring.
• Place a
rag
over the brake caliper pistons to prevent them
from popping out, and then force out the pistons using
com-
pressed
air.
I A CAUTION I
Do
not use extremely high pressure
to
remove the brake
caliper pistons, otherwise damage to the pistons will
result.
• R
emove
the
dust
seals
and
piston
ssals.
[A CAUTION I
Do
not
reuse
the
dust
se
..
l"
and
piston
seals
to
pre-
vent fluid leakage.
BRAKE CALIPER INSPECTION
BRAKE
CALI
PEn
Inspect each brake caliper cylinder wall for nicks, scratches or
ot
her damage. If any damages are found, replace the brake cali-
per wltn a new one.
BRAKE CALIPER PISTONS
In
spect the brake caliper pistons for any scratches or other dam-
age.
If
any damages are found, replace the piston with a new
one.
...._
-
~
00
00
http://www.motorcycle.in.th
To Next Page
Loading...
Need help?
General
