Suzuki drz 400 2000 User Manual

BEARINGS
Wash the bearing with a cleaning solvent and lubricate it with
motor
oil before inspection. Rotate the inner race and check to
see that
it turns smoothly. If it does not turn quietly and smoothly,
or if there are signs of any abnormalities, the bearing is defec-
tive and must be replaced with a new one as follows.
RIGHT COUNTERSHAFT BEARING
•
Remove the bearing retainer.
• Remove the right countershaft bearing using the special tool.
S 09921-20220: Bearing remover set
A CAUTION I
Replace the removed bearing with a new one .
• Install the right countershaft bearings using the special tool.
S 09913-70210: Bearing installer set
• Apply a small quantity of THREAD LOCK "1342" or THREAD
LOCK SUPER " 1322 " to tho boaring retainer screws, and
tighten them securely.
For USA
~ 99000-32050: THREAD LOCK " 1342"
For the other countries
= 99000-32110: THREAD LOCK SUPER " 1322"
LEFT COUNTERSHAFT BEARING
• Remove the left countershaft bearing using the special tool.
SJ 09923-73210: Bearing remover
09930-30102: Sliding hammer
I ACAUT }ON]
Replace the removed bearing with a new one .
• Install the left countershaft bearing using the special tool.
!iii 09913-70210: Bearing installer set
ENGINE 3-43
P lay
=:If-
I
101
1.1 , Play
- -
J( lJ
11
http://www.motorcycle.in.th

Suzuki drz 400 2000 Specifications

General

Brand	Suzuki
Model	drz 400 2000
Category	Motorcycle
Language	English