Suzuki drz 400 2000 User Manual

ENGINE COOLANT REPLACEMENT
• Remove the right side cover. (c:::7' 6-2)
• Loosen the stopper screw (j).
• Remove Ihe radiator cap ® and drain plug @, and then drain
the engine coolant.
• Tighten the drain plug @.
• Pour the specified engine coolant slowly into the radiator.
G En!line coolant:
Use an antifreeze designed for aluminum radiators
mixed with distilled water only.
Wat"r/antifr"""" mil<lur" ratio: 50:50 - 40:60
NOTE:
For engine coolant information, refer to page 5-4.
Air bleeding the engine coolant circuit
• Bleed air from the air bleeder bolt @.
• Tighten the air bleeder bolt @ to the specified torque.
~Air bleeder bolt : 5.5 N·m (0.55 kgf-m , 4.0 Ib-ft)
• Add engine coolant up to the radiator inlet.
• Tighten the radiator cap securely.
• After worming up and cooling down the engine, add tho apcci
fied engine coolant.
_ Engine coolant capacity:
1250 ml (1.3 US qt , 1.1 Imp qt)
RADIATOR HOSES
Inspect every 6 000 km (4000 miles , 6 months) .
Inspect the radiator hoses for damage and engine coolant leak-
age. If any damages are found, replace the radiator hoses with
new ones.
PERIODIC MAINTENANCE 2-15
http://www.motorcycle.in.th

Suzuki drz 400 2000 Specifications

General

Brand	Suzuki
Model	drz 400 2000
Category	Motorcycle
Language	English