3-
50
ENGINE
CRANKCASE
Reassemble the crankcase
in
the reverse order of disassembly.
Pay
special attention
to
the following points:
• Thoroughly remove the sealant material and oil stains
on
the
mating surface of the right and
left crankcases.
• Before installing the sump filter, wash the sump filter with clean-
ing solvent, and then blow compressed air through
it
to dry
it
off.
•
In
stall the dowel pins to the left crankcase.
• Apply engine oil
to
the conrod big end and
to
the transmis-
:siull
yei:tr~.
• Apply SUZUKI BOND "1207B" or "12
15
"
to
t
he
mating sur-
face
of
the right crankcase and section ® of both crankcases
8S
shown.
For USA
e 99104-31140: SUZUKI BOND "1207B"
For
the
other
countries
€lil99000-31110
: SUZUKI BOND "1215"
http://www.motorcycle.in.th
To Next Page
Loading...
Need help?
General
