THROTTLE CABLE PLAY (CARBURETOR)
Inspect initially
at
1
000
km (600 miles, 1
month)
and
every
6
000
km (4
000
miles, 6
months)
thereafter.
• Remove the fuel tank. (c:::::r 4-2)
A twin throttle cable system is used in this motorcycle. Cable
CD
is for pulling and cable ® is for returning.
To
adjust the cable
play, adjUst
me
returning cable first and lrlerl adju:;l IIle
jJull;r1Y
cable.
RETURNING
CABLE
PLAY
The returning cable should be adjusted to have a thread length ®
of 3 mm
(0.
12 in) as shown.
If
the adjustment is necessary, adjust
the thread
length
in
the following way:
• Loosen the locknut @.
•
Turn the nut
8)
to
obtain
the
thread
length
®
of
3 mm
(0
.
12
in)
.
• Tighten the locknut G) securely.
PULLING CABLE PLAY
The pulling cable should be adjusted to have a cable play ® of
2 -
~
mm
(0.08
- 0.
16
in)
as
shown
. If thl>
adjustml>nt
is
neces·
sary, adjust the cab
le
play
in
the following way:
• Loosen
th
e locknuts (
C§),
@
).
• Turn the
adjuster
(j) or @ to obtain the cable play ®
of
2 - 4 mm
(0
.
08
- 0.16 in).
• Tighten the locknuts
(C§),
@) securely.
A WARNING
After
the
adjustment
is completed,
check
that
handle-
bar
movement
does
not
raise the engine idle speed and
that
the
throttle
grip
returns
smoothly
and automati-
cally.
PERIODIC
MAINTENANCE
2-13
http://www.motorcycle.in.th
To Next Page
Loading...
Need help?
General
