Suzuki drz 400 2003 Service Manual

3-54 ENGINE
GEARSHIFT SHAFT
• Tighten the gearshift arm stopper to the specified lorque.
~ Gearshift arm stopper : 19 N·m (1 .9 kgf -m, 1 3. 5 Ib- ft )
OIL PUMP
• Before mounling the oil pump, apply engine oil to the Sliding
surfaces of Ihe oil pump case, outer rolor, inner rotor, and
shaft.
• When installing the inner rotor, align the pin ill with the
groove
@.
• Apply
a small quanlity of THREAD LOCK "1342" or THREAD
LOCK SUPER "1322" to the threaded parts of the oil pump
mounting screws , and then tighten t hem.
For USA
-tG 99000-32050: THREAD LOCK "1342"
For the other countries
-tG 99000-32110: THREAD LOCK SUPER "1 322"
•
When installing the oil pump driven gear. align th'" [lin G) with
the groove
@.
http://www.motorcycle.in.th

Suzuki drz 400 2003 Specifications

General

Brand	Suzuki
Model	drz 400 2003
Category	Motorcycle
Language	English