Suzuki GSX1200 1999 User Manual

3-74 ENGINE
• Install the left and right oil hoses and tighten their mounting
bolts to the specified torque.
!
Replace the O-rings (
AA
AA
A and
BB
BB
B) with new ones to prevent
oil leakage.
##
##
# Oil hose mounting bolt: 10 N
.
m (1.0 kgf-m)
NOTE:
When replacing the intake pipes, identify the different intake pipes
according to each I.D. code.
(1-03F2 for No.1)
(1-03F2 for No.2)
(3-03F2 for No.3)
(3-03F2 for No.4)
!
Use a new O-ring to prevent sucking air from the joint.
• Install the oil filter turning it by hand until you feel that the filter
gasket contacts the mounting surface. Then tighten it 2 turns by
using the special tool.
((
((
( 09915-40610: Oil filter wrench
NOTE:
Before installing the oil filter, apply engine oil lightly to its O-ring.
I.D. code

Suzuki GSX1200 1999 Specifications

General

Displacement	1157 cc
Bore x Stroke	79.0 mm x 59.0 mm
Compression Ratio	9.5:1
Ignition	Electronic ignition (Transistorized)
Final Drive	Chain
Front Suspension	Telescopic, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Starting	Electric
Engine Type	4-stroke, 4-cylinder, DOHC
Fuel System	Mikuni BSR36SS carburetors
Transmission	5-speed
Rear Suspension	Link-type, coil spring, oil damped
Ground Clearance	135 mm
Seat Height	790 mm