ENGINE 3-53
ENGINE REASSEMBLY
The engine is reassembled by carrying out the steps of disassembly in the reversed order, but there are a
number of steps which demand special descriptions or precautionary measures.
NOTE:
Apply engine oil to each running and sliding part before reassembling.
NOTE:
When installing the gearshift cam stopper plate
A
, align the pin
groove
B
with the pin
C
as shown in the figure.
• Install the gearshift cam related parts.
1 Gearshift cam
2 Gearshift cam stopper
3 Circlip
4 Circlip
5 Spring
!
Always use new circlips, 3 and 4.
• Position the gearshift cam in Neutral position as shown in the
figure, so that the gearshift forks and transmission gears can be
installed easily.
• Install the gearshift forks to the crankcase in the correct posi-
tion and direction.
1 For 4th driven gear
2 For 3rd drive gear
3 For Top driven gear
To Next Page
Loading...
Need help?
General
