CHASSIS 5-51
MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Remove the seat. (!5-2)
• Remove the document tray 1.
• Remove the brake hose connector by removing the screw.
• Remove the O-ring 8.
#
Replace the O-ring with a new one.
• Remove the reservoir tank mounting bolt 2.
• Remove the front footrest bracket mounting bolts 3.
• Place a rag underneath the brake hose union bolt on the mas-
ter cylinder to catch any spilt brake fluid. Remove the brake hose
union bolt 4 and disconnect the brake hose.
• Loosen the locknut 5.
• Remove the master cylinder along with the reservoir tank by
removing the mounting bolts 6 and push rod 7.
#
Immediately wipe off any brake fluid contacting any part
of the motorcycle. The brake fluid reacts chemically with
paint, plastics and rubber materials, etc., and will dam-
age them severely.
• Pull out the dust boot and remove the circlip.
&&
&&
& 09900-06108: Snap ring pliers
To Next Page
Loading...
Need help?
General
