4-4 FUEL AND LUBRICATION SYSTEM
REMOVAL
• Remove the seat. (!5-2)
• Remove the document tray.
• Remove the frame covers. (!5-3)
• Disconnect the fuel pump lead wire coupler 1.
• Remove the battery holder 2.
• Disconnect the ignitor lead wire couplers.
• Disconnect the fuel hoses.
• Remove the fuel pump by removing the two mounting bolts.
"
As gasoline leakage may occur in this operation, keep
away from fire and sparks.
INSPECTION
Measure resistance between the terminals of fuel pump lead wire
coupler.
If the measurement is out of specification, replace the fuel pump.
##
##
# 09900-25008: Multi-circuit tester
$$
$$
$ Fuel pump resistance: 1 – 2.5
ΩΩ
ΩΩ
Ω
To Next Page
Loading...
Need help?
General
