Suzuki GSX1200 1999 User Manual

5-34 CHASSIS
INSPECTION AND DISASSEMBLY
DUST SEALS AND SPACERS
• Remove the dust seals, washers and spacers from the swingarm.
• Inspect the spacers for any flaws or other damage. If any de-
fects are found, replace the spacers with new ones.
CHAIN BUFFER
• Remove the chain buffer 1.
• Inspect the chain buffer for wear and damage. If any defects are
found, replace the chain buffer with a new one.
SWINGARM NEEDLE BEARINGS
Insert the spacers into the needle bearings, move the spacer up
and down and check for any play.
If there is excessive play, replace the bearing(-s) with a new one.
• Remove the swingarm needle bearings and spacers using the
special tools.
!!
!!
! 09923-74510: Bearing remover
09930-30102: Sliding shaft
"
The removed needle bearings should be replaced with
new ones.
SWINGARM
Inspect the swingarm for damage.

Suzuki GSX1200 1999 Specifications

General

Brand	Suzuki
Model	GSX1200 1999
Category	Motorcycle
Language	English