3-2
OPERATION
BEFORE STARTING
OPERATION
GETTING ON OR OFF THE MACHINE
• Do not jump on or down from the
machine. Never attempt to get on or off
the moving machine.
• When getting on or off the cab, first fully
open the door to the locked position
and check that it does not move. (If
equipped with a cab door)
• Climb up/down the steps facing the
machine and holding the handrail to
support your weight in a three point
secure stance (hand and feet).
• Never use the safety bar or control
levers as hand holds.
BEFORE STARTING OPERATION
WALK-AROUND INSPECTION
Perform the walk-around inspections once a
day before starting the engine for the first
time that day.
Refer to “MAINTENANCE, Walk-around
inspection”, on pages 5-16 to 5-17.
DAILY INSPECTION
Perform the daily inspections once a day
before starting the engine for the first time.
Refer to “MAINTENANCE, Daily inspection”,
on pages 5-18 to 5-23.
To Next Page
Loading...
Need help?
General
