Takeuchi TL12 User Manual

2-13
CONTROLS
SEAT BELT
Be sure to fasten the seat belt securely
before starting the engine.
Fastening the seat belt
1. Adjust the seat to the desired position for
operation, sit up and sit back in the chair.
2. Slowly pull out the seat belt to the desired
length.
If pulled out too rapidly, the belt is
automatically locked. If this occurs, release
the belt and slowly pull the belt again.
SEAT AND SEAT BELT
AG7B023
B
A
3. Make sure that the belt is not twisted and
then insert the tongue plate (A) into the
buckle (B) of the seat belt until you hear a
clicking sound as it locks in place.
4. Check if the belt is securely locked by
pulling it, and arrange the belt around your
waist.
AG7B024
A
C
B
1. Grasp the tongue plate (A) and press the
button (C) on the buckle (B).
The seat belt retracts back into its original
position.
3-POINT SEAT BELT (OPTIONAL)
IMPORTANT: To prevent the belt from
falling off the shoulder and contacting
your arm or neck, wear the belt in such a
way that it is rested over the center of
your shoulder.
For details on how to use this seat belt, refer
to the 2-point seat belt at left.
Releasing the seat belt

Takeuchi TL12 Specifications

General

Brand	Takeuchi
Model	TL12
Category	Compact Loader
Language	English