Technicolor CGM4231 User Manual

1/8/2018 Proprietary and Confidential - Technicolor 39
6.2.1.1 Procedure,to,set,SNMP,LAN,Settings,
The following MIBs are used to configure the LAN settings:
• tchRgIpMgmtLanSubnetMask
• tchRgIpMgmtLanGateway
• tchRgIpMgmtLanDhcpServer
• tchRgIpMgmtLanDhcpServerPoolStart
• tchRgIpMgmtLanDhcpServerPoolEnd
• tchRgIpMgmtLanDhcpServerLeaseTime
• tchRgIpMgmtDnsServerIp
6.3 WAN
6.3.1 User Provisioning of WAN
Connection Tab / WAN
Click on the Connection tab then click on the WAN tab. The page displays WAN configuration
information. The page also allows the setting of WAN configuration - Working Mode (Router
Mode, Bridged Mode), Connection Mode (DHCP, Static IP), Host Name and Domain Name.
Figure 6.3
When the Gateway WAN provisioning is enabled with DHCP, IPv4 and IPv6 DHCP client on the
gateway will initiate DHCP request to get the eRouter / WAN IP for the gateway. In case of
DHCP v6, the eRouter IP is obtained from the MSO network through IP Prefix delegation.
6.3.1.1 Working,Mode,
The Gateway can be configured to operate in Bridge or Router mode using this drop-down tab,
which allows specific configuration of the device to Router or Bridge Mode for access and
security.

Technicolor CGM4231 Specifications

General

Brand	Technicolor
Model	CGM4231
Category	Gateway
Language	English