1/8/2018 Proprietary and Confidential - Technicolor 49
tchMocaDevEncryptionPassword takes an octet string as a value and defines the MoCA link
security password which must be the password for each attached node.
tchMocaDevChannelScanning takes an integer value as an input where “1” means the MoCA
interface will automatically scan and select the best available channel (default) and “0” means
channel scanning is disabled requiring the MIB to be set.
tchMocaDevChannelMask takes a channel list of bits as input that defines the channel or
channels the device should scan and is only applicable if tchMocaDevChannelScanning is
disabled.
6.6 Modem
Connection Tab / Modem
Click on the Connection tab then click on the Modem tab. The gateway will display the various
modem parameters:
• The Downstream Frequency is the frequency at which the modem is locked with the
CMTS during channel scan
• Scan Start Frequency is the frequency at which the modem tries to lock first (This
frequency was saved as favorite channel, where the modem was able to connect last
time).
• Upstream Channel ID is shows locked Upstream Channel Id for Cable Modem.
Figure 6.12