15
2 Setting up your DGA4130
DMS3-CTC-25-420 v1.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
2.1.1 DSL gateway setup
Connecting the cables
Proceed as follows:
1 Ta k e t h e D S L c a b l e .
2 Plug one end of the cable in the grey DSL port on the back of your DGA4130.
3 If your delivery:
Does not include a DSL splitter, plug the other end of the DSL cable into your telephone wall socket.
Includes a DSL splitter, plug the other end of the DSL cable into the DSL/Modem port of the DSL splitter. Plug the
(LINE) cable of the DSL splitter into your telephone wall socket.
Only use the DSL cable provided in your package. Other DSL cables may not work optimally with the DSL
subscription that you purchased.
A splitter/filter is a box that typically has the following connectors:
•A Line input
•A Phone/PSTN output
•A DSL/Modem output (optional)
To Next Page
Loading...
Need help?
General
