Technicolor DGA4130 User Manual

32
3 Wireless networking
DMS3-CTC-25-420 v1.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
3.3.2 Configuring WPA-Enterprise encryption
Requirements
• A RADIUS server must be readily set up on your local network.
Procedure
Proceed as follows:
1 Browse to the DGA4130 web interface.
For more information, see “4.1.1 Accessing the DGA4130 web interface from your local network” on page 40.
2 Click Wireless. The Wireless page appears.
3 On the left menu, select the access point that you want to configure.
4 In the Security Mode list under Access Point, select one of the following modes:
 WPA2
 WPA+WPA2
5 The following RADIUS settings are now available for configuration:
 RADIUS Authentication Server's IP: enter the IP address of your RADIUS server.
 RADIUS Authentication Server's port: enter the WPA RADIUS Port.
 RADIUS Authentication Server's secret: enter the WPA RADIUS Key.
6 Click Save to apply your changes.
7 Reconnect your wireless client(s) to your DGA4130.
For more information, see “3.2 How to manually connect a wireless client” on page 29.

Technicolor DGA4130 Specifications

General

Brand	Technicolor
Model	DGA4130
Category	Network Router
Language	English