63
4 DGA4130 web interface
DMS3-CTC-25-420 v1.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
4.4 Backing up/restoring your configuration
Introduction
Once you have configured your DGA4130 to your needs, it is recommended to back up the configuration of your
DGA4130 for later use. This way you can always return to the latest working configuration of your DGA4130 in case of
problems.
Backing up your configuration
Proceed as follows:
1 Browse to your DGA4130 web interface.
For more information, see “4.1.1 Accessing the DGA4130 web interface from your local network” on page 40.
2 Click Gateway. The Gateway page appears.
3 In the Export Configuration section, click Export.
4 The DGA4130 prompts you to save your backup file.
5 Save your file to a location of your choice.
Restoring your configuration
Proceed as follows:
1 Browse to your DGA4130 web interface.
For more information, see “4.1.1 Accessing the DGA4130 web interface from your local network” on page 40.
2 Click Gateway. The Gateway page appears.
3 In the Import Configuration section, click Browse, open your backup file and then click Import.
4 The DGA4130 restores the saved configuration.
5 The DGA4130 restarts.
Do not change the file extension.
Do not edit the backup files as this may result in corrupt files making them worthless as configuration backup.
Backup files usually have .bin as extension.
To Next Page
Loading...
Need help?
General
