Technicolor DGA4130 User Manual

66
5 Content and Printer Sharing
DMS3-CTC-25-420 v1.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
Customizing the content sharing settings
To change the default settings, proceed as follows:
1 Browse to the DGA4130 web interface.
For more information, see “4.1.1 Accessing the DGA4130 web interface from your local network” on page 40.
2 Click Content Sharing. The Content Sharing page appears. Under General status, you can change the following
settings:
 Samba name:
Your DGA4130 will share the content to the Samba devices under this name.
 Samba enabled:
Allows you to enable or disable the Samba file sharing server.
 DLNA enabled:
Allows you to enable or disable the DLNA service.
 DLNA name:
Your DGA4130 will share the content with other DLNA devices under this name.
3 When you click show advanced, you will be able to configure the Samba name and DLNA name. On top of that you
can also change the:
 Samba workgroup:
Enter the same workgroup as used by your computer(s).
 Samba description:
Add a short description for the DGA4130 shared content.
4 Click Save.
5 All users connected to your DGA4130 can now access the data stored on the storage device(s) that are connected to
your DGA4130.

Technicolor DGA4130 Specifications

General

Brand	Technicolor
Model	DGA4130
Category	Network Router
Language	English