6Ć51
If you ship the TAS 465 Oscilloscope, pack it in the original shipping carton
and packing material. If the original packing material is not available, packĆ
age the instrument as follows:
1. Obtain a corrugated cardboard shipping carton with inside dimensions
at least 15Ăcm (6Ăin) taller, wider, and deeper than the TAS 465 OscilloĆ
scope. The shipping carton must be constructed of cardboard with
170 kg (375 pound) test strength.
2. If you are shipping the TAS 465 Oscilloscope to a Tektronix field office
for repair, attach a tag to the oscilloscope showing the instrument owner
and address, the name of the person to contact about the instrument,
the instrument type, and the serial number.
3. Wrap the oscilloscope with polyethylene sheeting or equivalent material
to protect the finish.
4. Cushion the oscilloscope in the shipping carton by tightly packing
dunnage or urethane foam on all sides between the carton and the
oscilloscope. Allow 7.5Ăcm (3Ăin) on all sides, top, and bottom.
5. Seal the shipping carton with shipping tape or an industrial stapler.
To Next Page
Need help?
General
