!% $
1Ć9
!!# !#!"#"
This subsection lists the various that describe the
TAS 465 Analog Oscilloscope. Included are electrical and environmental
characteristics.
Warranted characteristics are described in terms of quantifiable performance
limits which are warranted. This subsection lists only warranted
characteristics. A list of starts on page 1Ć15.
NOTE
Performance Verification
boldface type .
The electrical characteristics found in these tables of warranted characterisĆ
tics apply under the following conditions:
H The oscilloscope has been adjusted at an ambient temperature between
+20_ C and +30_ C
H A warmĆup period of at least 20 minutes has occured
H The operating temperature is between -10_ C and +55_ C (unless
otherwise noted)
H The Temperature Compensation Calibrations (signal path compensaĆ
tion) have been performed
(*)!!# !#!"#" + !# # '"#
"! #
Input Impedance, DC Coupled 1 MW ±1% in parallel with 20 pF ±2.0 pF.
Variable Range Increases deflection factor by 2.5:1.
$!' The limits are as follows:
+15_ Cto+35_ C ±2.5% over the center 5 diviĆ
sions after signal path compenĆ
sation.
-10_ Cto+15_ C and
+35_ Cto+55_ C
±3.5% over the center 5 diviĆ
sions after signal path compenĆ
sation.
&# # # $# 100 MHz.
!!
#"
To Next Page
Loading...
Need help?
General
