Getting Started
8. Cursor and measurement readouts show results and messages.
NOTE. Waveforms th at extend b ey ond the sc reen (overrange ) will display a
message in the mea surement readout ("clipping"). This indicates that the
numerical readout is an inv alid value. Adjust the vertical scaling to ensure
the readout is valid.
9. Trigger readouts show the trigger sources, slopes, and l evels, and
position.
10. Readout sho ws the delay setting or the trigger location within the
record.
11. Horizontal readout shows the main or zoom time/division.
12. Auxiliary w aveform readouts show the vertical and horizontal scale
factors of the math or reference waveforms.
13. Channel readouts show the channel scale f actor, coupling, input
resistance, bandwidth limit, and invert status.
14. Triangle icon with the battery icon indicates a battery is installed
and battery power is in use. The battery icon shows the a p pro ximate
charge level of the battery. (See page 11, Operating Safely w ith
Battery Power.)
15. Power-plug icon with the battery icon indicates a battery is installed
but lin e power is in use. The bat ter y may be charging. The battery
icon shows the approximate charge level.
Using QuickMenus
The QuickMenu feature simplifies the use of the oscilloscope. When
you push the Q uickMenu button, a set of frequently used menu
functions show on the display. Then, push the screen buttons around the
display to operate the QuickMenu. The Reference chapter has general
instructions on how to operate QuickMenus. (See page 101.)
TDS3000C Series O scilloscope User Manual 25
To Next Page
Loading...
Need help?
General
