,A,
Rev A: 0611
5/98
TEMPTRONIC
COFPO2ATI3N
Preparation for Use
TP04100A Interface
&
Applications
2-7
Unpacking Instructions
When unpacking the system, save all packaging material in the event the TP04100A system has to be
reshipped later.
1.
Transport the packaged TP04100A to its proposed installation site (if accessible).
CAUTION
1:
Some of the packing materials in the TP04100A shipment may be a source for
Electrostatic Discharge (ESD) potential. Do not unpack in the vicinity of ESD sensitive
components.
ATTENTION
1:
Se reporter au numCro d'Avertissement ou au nurnCro &Attention approprid,
dans la section
((
Consignes de sdcuritd
))
au dCbut de ce manuel.
VORSICHT!
1:
Bitte beziehen Sie sich auf die entsprechende Warnungs- oder Vorsichtsnummer
im Abschnitt iiber Vorsichtsmal3regeln
am
Anfang dieses Handbuchs.
PRECAUCION
1:
Vea el n6mero de la Advertencia o Precaucih en la secci6n de "Precauciones
de Seguridad", a1 comienzo de este manual.
2.
Cut and remove the band seals holding the packing carton on its skid (if any). Remove carton
strapping and lift off the carton cover and the carton shell. (See Figure 2-1).
3.
Visually inspect the TP04100A after unpacking and do not proceed with its preparation for use if
any signs of damage are found.
a.
Review the packing slip to verify that all purchased items have been received (see Figure 2-3,
below).
b.
Verify that all panel switches are in place and turned off.
c.
Verify the integrity of all exposed cables and connections.
d.
Verify that all visible hardware is secure.
Page
2-7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
