25
Eth0 is 1/WAN port on the back of the device. It is to function as a WAN port here. After you finish your settings, click
and then refer to To Set up WAN Service for ETH Interface to configure the WAN service for Internet
access.
4.2.2 WAN Service
This router provides two WAN services:
- WAN Service for ATM Interface (ADSL uplink)
- WAN Service for ETH Interface (Ethernet uplink)
To Set up WAN Service for ATM Interface
EoA (PPPoE, IPoE and Bridge)
If you configured the ATM Interface (ADSL uplink) and select EoA as the DSL link type, follow below steps to
configure the WAN service: