Texas Instruments TI-89 Titanium User Manual

Number Bases 664
Number Bases
Entering and Converting Number Bases
Regardless of the Base mode, you must always use the appropriate prefix when
entering a binary or hexadecimal number.
Entering a Binary or Hexadecimal Number
To enter a binary number, use the form:
To enter a hexadecimal number, use the form:
Note: You can type the b or h in the prefix, as well as hex characters A–F, in uppercase
or lowercase.
If you enter a number without the
0b or 0h prefix, such as 11, it is always treated as a
decimal number. If you omit the
0h prefix on a hexadecimal number containing A–F, all
or part of the entry is treated as a variable.
0b binaryNumber (for example: 0b11100110)
Binary number with up to 32 digits
Zero, not the letter O, and the letter b
0h
hexadecimalNumber (for example: 0h89F2C)
Zero, not the letter O, and the letter h
Hexadecimal number with up to 8 digits

Texas Instruments TI-89 Titanium Specifications

General

Brand	Texas Instruments
Model	TI-89 Titanium
Category	Calculator
Language	English