TOHATSU MFS 4 Service Manual

5
5-47
4st 4/5/6 2011
40) Installing Flywheel
1. Attach key to crankshaft and install flywheel. Tighten
flywheel nut to specified torque.
Flywheel Nut :
50 N · m (37 lb · ft) [5.0 kgf · m]
2. Attach igniter.
Igniter clearance:
0.5mm (0.020 in)
3. Attach thermostat 1, gasket 2 and thermostat cap 3,
and tighten bolts to specified torque.
Thermostat cap mounting bolts:
6 N · m (4 lb · ft) [0.6 kgf · m]
Old
1
2
3
3
Thickness Gauge:
P/N. 353-72251-0
Flywheel puller kit :
P/N. 369-72211-0
Be careful not to scratch periphery of flywheel, or
sparking performance may be deteriorated.
MFS4-5-6Ech05110425.qxd11.4.2511:39AM  ページ47

TOHATSU MFS 4 Specifications

General

Brand	TOHATSU
Model	MFS 4
Category	Outboard Motor
Language	English