TOHATSU MFS 4 Service Manual

7-9
4st 4/5/6 2011
7
2. Disassembling and Assembling
Procedure
1) Removal and inspection of drive shaft housing
1. Tilt up drive shaft housing.
3. Remove thrust rod 2.
11
22
33
44
2. Remove reverse lock arm 1.
4. Remove wing nut 3 for co-pilot.
Loosed four swivel bracket (B) bolts 4.
Hold drive shaft to prevent it from dropping.
MFS4-5-6Ech07110422.qxd 11.4.22 5:55 PM  ページ9

TOHATSU MFS 4 Specifications

General

Brand	TOHATSU
Model	MFS 4
Category	Outboard Motor
Language	English