Care and service
EN DE
9.3 Maintenance intervals
Servicing is to be carried out only by Torqeedo Service or authorised service partners, according to elapsed time or operating hours, as specified. The activities before each use
and the change of anodes can be carried out independently.
If the prescribed maintenance intervals are not complied with or documented, this leads to loss of warranty. Ensure that the services carried out are documented in your
service check folder.
Service activities Before each use Every 6 months or after 100 operating
hours
Every 5 years or after 700 operating
hours (whichever occurs first)
Batteries and battery cables
■
Confirm full insulation
■
Visual inspection
■
Secure against slipping and tipping
over
■
Check that threaded cable
connections are screwed tight
Other screws and bolts on the
Cruise system
■
Check tight fit
Cable connections
■
Confirm full insulation
■
Check that threaded cable
connections are screwed tight
Electronic accelerator lever
■
Check stability
■
Check functioning
O-rings To be checked by a certified service
partner
Gear shaft
■
Visual inspection
To be checked by a certified service
partner
Galvanic anodes
■
Visual inspection
Replace as complete sets
page 99 / 113
To Next Page
Loading...
Need help?
General
