56
Zoom function/Scene navigation
Using the Zoom function (DVD/VCD)
You can change the viewing scale of a picture by using the Zoom function. Once the image has
been rescaled, use the arrow buttons / to pan the image.
1
Press CH RTN ZOOM during playback.
The view will zoom into the centre of the image.
Each press of the button will increase the scale value:
1(x 1.3), 2 (x 1.5), and 3 (x 2.0).
2
Press / to pan the scene and view different sections of the picture.
3
To return to normal view, press CH RTN ZOOM repeatedly until Off appears.
Note:
• You can use the Pause and Slow playback functions in Zoom mode.
• Zoom function may not apply to some discs.
• You can use the Zoom function for DivX
®
CDs.
Locating a specific scene (DVD/VCD/Audio CD)
Scene navigation options differ depending on the kind of disc. DVDs use the title, chapter or
record time to locate the start point for playback; audio and video CDs use the record time or
track number. To view the disc’s title/track, chapter, and time list, press .
1
Press JUMP during playback, resume or stop
mode.
2
Press to select a navigation option: Title/Track,
Chapter or Time.
3
Use the number buttons (0–9) to key in a value for the
navigation option you selected.
If you input a wrong number, press EXIT/CANCEL .
Refer to the disc package to check the correct number.
4
Press ENTER/CH LIST to start playback.
Note:
• When you use title navigation, playback starts from the first chapter of the selected title.
• Scene navigation may not apply to some discs.
• Scene navigation by record time is applicable only to DivX
®
CDs.
• For audio and video CDs, you can locate a scene by track number or record time.
• For PBC-enabled VCDs, turn off the PBC function first before using the JUMP function (see
page 64 for instructions).
To Next Page
Loading...
Need help?
General
