Chapter5
SettingupyourTV
InitialSetup
When you first turn on or reset the TV, the Initial Setup window will
appear.
1 In the Menu Language field, press the 41/_ (arrow) buttons to
select your preferred language.
2 Press the A/• (arrow) buttons to select Time Zone.Then set
your desired time zone, using the 41/_ (arrow) buttons and
press the ENTER button.
The Store / Home Mode settings window appears.
3 For normal home use, press the 41/_ (arrow) buttons to select
Home, and then press the ENTER button.
The ANT/CABLE In setup window appears.
4 Press the 41/_ (arrow) buttons to select the input source (Cable
or Antenna), and then press the ENTER button.
5 Press the ENTER button to select Start Scan and continue with
the Auto Tuning.
You must select a Language and either Home/Store mode, before
you can exit out of the Setup Menu. The EXIT button will not
function until these selections have been made.
42
To Next Page
Loading...
Need help?
General