2 SettingupyourTV
Usi_q theAuto A_pectJeamre
ScrollingtheTheaterWideTM picture(TheaterWide2 and3
only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1 In the Picture Menu, highlight Display Settings, and then
press the ENTER button.
2 Highlight Picture Position, and then press the ENTER button.
(The Picture Position will be available when Picture Size is
TheaterWide 2 or TheaterWide 3.)
(Samp/e Image) Picture metal - Theater Sett#Tgs se/ectio17
3 The Picture Position screen will appear, press _I/I,, (arrow)
button to scroll the picture up and down as needed.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset and then press
the ENTER button.
The adjustment range is from -5 to +10.
NOTE Whenreceivingasignalat480iresolution,thepicturescrollfunction
mayhavelimitedadjustmentrange.
UsingtheAutoAspectfeature
When this feature is set to On, the TV will automatically select the
picture size when one of the following input sources is received:
o.** A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE
input.
o.** 480i, 480p, 720p, 1080i, 1080p, orVGA(60Hz) signal from
the HDMT_ inputs.
To Next Page
Loading...
Need help?
General