Z_ SettingupyourTV
Vic_vi_qthe system stares
To set the Daylight Saving Time stares:
1 In the Inst'_ation menu, highlight Dayfight Sa_4ngTime, and
press the ENTER button.
2 Press the A/T (arrow) buttons to select On or Off, and then
press the ENTER button.
Viewingthesystemstatus
1 In the Get Help menu, highlight System Information, and
then press the ENTER button. The related information
appears.
To close the screen and return to the Get Help menu:
oI. Highlight Done in the Support Information screen, and then
press the ENTER button.
To return to normal viewing, press the EXIT button.
ResettingFactoryDefaults
To reset all settings and channels to their factory default values:
1 Press the MENU button and open the Installation menu.
2 Highlight Reset TV, and then press the ENTER button.
3 Enter your PIN code (If a PIN code has been set).
4 Aconfirlnation screen appears. Select Yes, and press the ENTER
button. The TV will turnoff autolnatically.
To cancel the reset process, select No, and press the ENTER button.
To Next Page
Loading...
Need help?
General