2 SettingupyourTV
{?nderstandi_ the last mode memoryJeamre
.5. Digital signal strength indicator (bar graph in lower right
corner of box; for digital signals only)
.5. Stereo, Mono, or SAP audio stares (when in HDMP input
mode, Dolby _ Digital, or PCM)
.5. Video resolution
.5. Aspect ratio of incoming video signal (4:3 or 16:9)
o:* V-Chip rating stares
o:* GameTimer (if set)
To close the Recall screen, press the RECALL button again.
To display TV stares information using INFO, press the INFO
button.
The following additional information will display for digital
channels, if applicable:
o:* Title
o:* Duration
o:* Detailed description
(Sample Illustration) In[b banner
To close the INFO screen, press the INFO button again.
Understandingthelastmodememoryfeature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature automatically turns on the TV when the power is
resupplied.
NOTE Ifyouknowyouwill beawayfromtheTVforanextendedperiodof
timeyoushouldunplugthepowercord.
To Next Page
Loading...
Need help?
General