SettingupyourTV 91
Displayi_ TVstatus inJormation
Mode
Auto(default)
Full
Limited
Press the •/• (arrow) buttons to select Auto, Full, or
Limited, and then press the ENTER button.
Description
AdjustsRGBfull rangesignalautomatically.
ROBin!_u!_s!gna!_o)S_a_ed!no_ang, efrom0to255.
RGBinputsignalisdisplayedin therangefrom16to235.
The HDMV setting (RGB Range) needs proper HDMI TM source
devices. If your HDMI ®source device does not support these
features, the TV may not work properly when this feature is enabled.
HDMI®InformationDisplay
Viewing the HDMI ®signal information:
1 From the Options menu, highlight HDMI Information
Display, and then press the ENTER button.
2 Press the • / • (arrow) buttons to select On or Off, and then
press the ENTER button.
3 When the HDMI Information is set to On, pressing the INFO
button displays the HDMI Information banner (Resolution,
Scan Type, Frame Rate, Aspect, Bit Depth, Color Space, RGB/
YUV, Chrolna Format). When the HDMI Information is set to
Off, the normal banner is displayed.
NOTE ._,,Thesignalinformationbannerwill appearwhenthisfeatureis set
toOnandyouwatchanHDMI® inputandpresstheINFO
button.Thesignalinformationwilldisappearafterapproximately
60seconds.
¢ IfyoupresstheINFObuttonwhenthisfeatureissettoOff,only
thenormalbannerwill appear.
DisplayingTVstatusinformation
To display TV status information using the RECALL button:
o!. Press the RECALL button on the remote control.
The following information will be displayed (if applicable):
o!. Current input (ANT/CABLE, Video, etc.)
o!. If ANT/CABLE is the current input, either"CABLE" (for cable
TV) or "ANT" (for over-the-air broadcasts).
o!. Channel number (if in ANT/CABLE mode)
To Next Page
Loading...
Need help?
General