6 TEMPLATES
Changing Data 143
Changing Data
You can change the data of templates or private groups that are already registered, such as the template
name, user name, password and setting of the automatic start function.
The data of the public template group can be changed from the TopAccess menu but this cannot be done
from the control panel. For how to change them from the TopAccess menu, refer to the TopAccess Guide.
Changing private group data
1
In the template menu, select the desired group.
1) Press the [REGISTRATION] tab.
2) Select the desired group by pressing its button or keying in its group number (3 digits).
3) Press [EDIT].
To switch the menu
Press or .
2
Key in the password for the selected group. (If no password is set, go to step 3.)
1) Press [PASSWORD] and then enter the password with the buttons on the touch panel or the digital
keys on the control panel.
2) Press [OK].
3
Change the data following step 3 on P.138 “Creating a new private group”.
4
Press the [FUNCTION CLEAR] button on the control panel.
The menu returns to the BASIC menu.
To Next Page
Loading...
Need help?
General
