Toshiba e-STUDIO 257 User Manual

3.BASIC COPY MODES
Selecting Finishing Mode 81
3 BASIC COPY MODES
4
Let go of the paper, and then press the stapling button.
Stapling starts. When the stapling position switching lamps start blinking, it means the stapling has
finished. Then remove the stapled paper.
Be sure that your hands are away from the paper while stapling is in progress.
Finishing the manual staple mode
Remove the stapled paper from the lower receiving tray, and then press the stapling button. The shutter
of the paper exit area closes. This means that manual stapling is finished. If no operation is performed
for approx. 15 seconds, the manual staple mode will be automatically finished.

Toshiba e-STUDIO 257 Specifications

General

Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan
Paper Size	A4, A5, B5
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows
Print Speed	25 ppm (A4)