104
Learning the Basics
Saving your work
5.375 x 8.375 ver 2.3
Sample Run dialog box
2 In the Run dialog box:
❖ For a program in the Windows
®
NT folder, type just the
program name. Otherwise, if you know the program’s
location, type the full file path. Then click OK.
❖ If you do not know the program’s location, you can
search for it by clicking Start, and then Search. When
the Search screen displays, follow the displayed
instructions.
3 Type WordPad in the Open text box and press
Enter.
HINT: To run the same program again, click the arrow to the
right of the text box and select the command line from the
drop-down list.
Saving your work
Before you turn off the computer, save your work to the hard
disk drive or a diskette.
Always save your data even when you are using the Standby
command. If your battery fully discharges, your unsaved
information will be lost. Your computer can be configured to
warn you when the battery is running low. See “Setting battery
alarms” on page 125.
To Next Page
Loading...
Need help?
General