140
Exploring Your Computer’s Features
Setting up for communications
5.375 x 8.375 ver 2.3
4 Make a note of the COM port number shown in the
Attached to field.
5 To verify that the modem is set up properly, double-click
the COM port to which your modem is connected.
The Modem AMR Properties box appears. In the device
status area, the computer should indicate whether the
modem is working properly.
6 If the modem is not working properly, click
Troubleshooting and follow the instructions.
7 Click OK to close the Properties box, then the Phone and
Modem options box.
8 Close the Control Panel.
For more information regarding your system's V.92 modem,
visit the Toshiba Web site at pcsupport.toshiba.com.
Connecting the modem to a telephone line
Before you can communicate using the modem, you need to
connect it to a telephone line. Your computer’s built-in
modem provides an RJ11 jack which allows you to connect
the modem to a standard voice-grade telephone line.
1 Plug one end of a telephone cable (purchased separately) into
the modem port on the back of the computer.
Sample connecting the telephone cable to the modem port
2 Connect the other end to the RJ11 wall jack.
To Next Page
Loading...
Need help?
General