Toshiba Tecra M5 User Manual

56
Getting Started
Using the Toshiba Dual Pointing Device
5.375 x 8.375 ver 2.3
Once you have positioned your cursor, you can either click it
into place by double-tapping the TouchPad or clicking the
control buttons.
Control buttons
When a step instructs you to click or choose an item, move
the cursor to the item, then press and release the primary
(left-hand) button. To double-click, press the primary button
twice in rapid succession. The primary button usually
corresponds to the left mouse button.
The function of the secondary (right-hand) button depends on
the program you are using. It usually corresponds to the right
mouse button. Check your program’s documentation to find
whether it uses the right mouse button.
Disabling or enabling the Dual Pointing Device
The Dual Pointing Device is enabled by default. To change
the enable/disable Dual Point setting:
1 Click Start, Control Panel, Printers and Other
Hardware, and then click Mouse Properties.
The Mouse Properties window appears.
2 Click the Dual Pointing Device tab.
The Dual Pointing Device tab view window appears.
3 Select Disable or Enable, whichever is appropriate.
4 Click Apply.
5 Click OK.
The Mouse Properties window closes.
6 Close the Printers and Other Hardware window.
7 Close the Control Panel window.

Toshiba Tecra M5 Specifications

General

Brand	Toshiba
Model	Tecra M5
Category	Laptop
Language	English