7-9
OIL TANK
■ General
1. An independent resin tank is separately bolted on to the frame.
2. It is installed on the front frame.
3. The oil injection and level can be checked easily by removing the toe board.
4. The return filter is located under the front toe board.
■ Other hydraulic parts
1. Oil tank cap
• A rubber male-female type cap is adopted.
• A separate breather is adopted for downsizing.
• Check the oil level by holding the cap end in contact with the retainer opening as illustrated.
2. Breather
To ensure prevention of oil leakage from the breather, an off-cap structure is adopted. (40-µ mesh)
Breather
Level gauge & cap
Return filter
Oil tank
Retainer
To Next Page
Loading...
Need help?
General
