5-8
■ Abbreviations display on the screen
Abbreviation Meaning Abbreviation Meaning
A1 Attachment switch 1 SSD2 Drive motor 2 rpm sensor
A2 Attachment switch 2 SSP Pump motor rpm sensor
C/R Controller STS Steering angle sensor
DCR Traveling AC driver STS1 Steering angle sensor 1
DM Drive motor STS2 Steering angle sensor 2
DSF Forward direction switch STSC
Steering angle sensor for straight
traveling
DSR Backward direction switch SWAC Accelerator switch
FAN Cooling fan SWTK Tilt knob switch
H/M Hour meter T Forward and backward tilt switch
K-DIFF
Deviation of steering angle knob
position
TBD
Traveling AC driver control board
surface temperature
K-POS Steering angle knob position TBP
Material handling AC driver control
board surface temperature
KSOL Steering synchronizer solenoid TD Drive motor temperature
LOAD Material handling hydraulic pressure TEMP CPU board surface temperature
L Lift switch THCD Main drive circuit temperature
LSB Brake switch THCP Main pump circuit temperature
LSD Seat switch TILTF Forward tilt restriction position
MH Lifting height switch TILTL Tilt level position
P/C Power control TIRE Tire angle sensor voltage
PCR Material handling AC driver TP Pump motor temperature
PM Pump motor VB48 Battery voltage
POTA Accelerator potentiometer VBBD
Traveling AC driver power source
voltage
POTT Tilt angle potentiometer VBBP
Material handling AC driver power
source voltage
SPD Main traveling speed VBKS Voltage after key switch
SPL Load sensor VBMB Main controller input voltage
SSD1 Drive motor 1 rpm sensor VBSOL Solenoid power source voltage
To Next Page
Loading...
Need help?
General
