Read View: Select the View to be the Read View. The management access
is restricted to read-only, and changes cannot be made to the
assigned SNMP View.
Write View: Select the View to be the Write View. The management access
is writing only and changes can be made to the assigned
SNMP View. The View defined both as the Read View and the
Write View can be read and modified.
Notify View: Select the View to be the Notify View. The management station
can receive trap messages of the assigned SNMP view
generated by the switch's SNMP agent.
¾ Group Table
Select: Select the desired entry to delete the corresponding group. It is
multi-optional.
Group Name: Displays the Group Name here.
Security Model: Displays the Security Model of the group.
Security Level: Displays the Security Level of the group.
Read View: Displays the Read View name in the entry.
Write View: Displays the Write View name in the entry.
Notify View: Displays the Notify View name in the entry.
Operation: Click the Edit button to modify the Views in the entry and click
the Modify button to apply.
Note:
Every Group should contain a Read View. The default Read View is viewDefault.
13.1.4 SNMP User
The User in a SNMP Group can manage the switch via the management station software. The
User and its Group have the same security level and access right. You can configure the SNMP
User on this page.
Choose the menu SNMP→SNMP Config→SNMP User to load the following page.
184
To Next Page
Loading...
Need help?
General