TP-Link JetStream TL-SG3424P User Manual

Figure 13-10 Event Config
The following entries are displayed on this screen:
¾ Event Table
Select: Select the desired entry for configuration.
Index: Displays the index number of the entry.
User: Enter the name of the User or the community to which the
event belongs.
Description: Give a description to the event for identification.
Type: Select the event type, which determines the act way of the
network device in response to an event.
z None: No processing.
z Log: Logging the event.
z Notify: Sending trap messages to the management station.
z Log&Notify: Logging the event and sending trap messages to
the management station.
Owner: Enter the name of the device or user that defined the entry.
Status: Select Enable/Disable the corresponding event entry.
13.3.3 Alarm Config
On this page, you can configure Statistic Group and Alarm Group for RMON.
Choose the menu SNMP→RMON→Alarm Config to load the following page.
192

TP-Link JetStream TL-SG3424P Specifications

General

Brand	TP-Link
Model	JetStream TL-SG3424P
Category	Switch
Language	English