EasyManuals Logo

TP-Link tl-wr845n User Manual

TP-Link tl-wr845n
119 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
TL-WR845N
300Mbps Wireless N Router
Address Lease Time - The Address Lease Time is the amount of time a network user will
be allowed connection to the router with their current dynamic IP Address. Enter the amount
of time in minutes and the user will be "leased" this dynamic IP Address. After the time is up,
the user will be automatically assigned a new dynamic IP address. The range of the time is 1
~ 2880 minutes. The default value is 120 minutes.
Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the router,
default value is 192.168.0.1
Default Domain - (Optional.) Input the domain name of your network.
Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your
ISP.
Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP
provides two DNS servers.
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
"Obtain an IP Address automatically" mode.
4.8.2 DHCP Clients List
Choose menu DHCP > DHCP Clients List, you can view the information about the clients
attached to the router in the next screen.
ID - The index of the DHCP Client
Client Name - The name of the DHCP client
MAC Address - The MAC address of the DHCP client
Assigned IP - The IP address that the router has allocated to the DHCP client.
Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,
a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the current
attached devices, click the Refresh button.
4.8.3 Address Reservation
Choose menu DHCP > Address Reservation, you can view and add a reserved addresses for
clients via the next screen.When you specify a reserved IP address for a PC on the LAN, that PC
-45-

Table of Contents

Other manuals for TP-Link tl-wr845n

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link tl-wr845n and is the answer not in the manual?

TP-Link tl-wr845n Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
VPN supportPPTP, L2TP, IPSec
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Memory card slot(s)-
Ethernet LAN (RJ-45) ports5
Product typeTabletop router
Product colorWhite
Antennas quantity3
Antenna gain level (max)5 dBi
Output current0.6 A
Output voltage9 V
Power source typeDC
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
Security algorithms64-bit WEP, 128-bit WEP, 152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
CertificationCE, FCC, RoHS
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)5 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth144 mm
Width230 mm
Height35 mm

Related product manuals