Maintenance and Adjustment
106
Brake Fluid Level Inspection and
Adjustment
1. Front brake fluid reservoir
2. MAX level line
3. MIN level line
The brake fluid level in the reservoirs
must be kept between the MAX and MIN
level lines (reservoir held horizontal).
Remove the reservoir cover.
Fill the reservoir to the upper level line
using new DOT 4 fluid from a sealed
container.
Refit the reservoir cover ensuring that
the diaphragm seal is correctly fitted.
Tighten the cap retaining screws to
1Nm.
1. Rear brake fluid reservoir
2. Lower level line
3. Upper level line
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult your authorised
Triumph dealer for advice before
riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause reduced brake
performance potentially leading to
loss of motorcycle control and an
accident.
To Next Page
Loading...
Need help?
General
